ITEM | CAPABILITY | DETAILS | |
---|---|---|---|
Layer | 1-24 layer | 1-24 copper layers PCB prototypes | |
Controlled Impedance PCB | 4/6 layer | No extra charge and only accept our default layer stack-up | |
Material | FR-4 | FR-4 board material | |
Max. Dimension | 400x500mm | For Single & Double Layer, the maximum dimension is 400x500mm; For Multi Layer PCB, the maximum dimension is 300x300mm. | |
Dimension Tolerance (Outline) | ±0.2mm | ±0.2mm for CNC routing, and ±0.2mm for V-scoring | |
Solder Mask | LPI | Liquid Photo-Imageable Solder Mask is the most common mask type. No extra fee for different color of solder mask. | |
Thickness | 0.4--2.0mm | 0.4/0.6/0.8/1.0/1.2/1.6/2.0mm | |
Thickness Tolerance (Thickness≥1.0m m) |
± 10% |
e.g. For the 1.6mm board thickness, the finished board thickness ranges from 1.44mm(T- 1.6×10%) to 1.76mm(T+1.6×10%) | |
Thickness Tolera nce (Thickness<1.0m m) | ± 0.1mm | e.g. For the 0.8mm board thickness, the finished board thickness ranges from 0.7mm(T-0.1) to 0.9mm(T+0.1). | |
Finished Outer Layer Copper | 1 oz/2 oz (35um/75um) | Finished outer layer copper weight is 1oz or 2oz | |
Finished Inner Layer Copper | 0.5 oz (17um) | Finished inner layer copper weight is 0.5 oz only | |
Min.Trace | 3.5mil | For Single&Double Layer PCB, the minimum trace width is 5 mil; For Multi Layer PCB, the minimum trace width is 3.5mil. | |
Min.Spacing | 3.5mil | For Single&Double Layer PCB, the minimum spacing is 5 mil; For Multi Layer PCB, the minimum spacing is 3.5mil. | |
Min. Via hole size | 0.2mm | For Single&Double Layer PCB, the minimum via hole size is 0.3mm; For Multi Layer PCB, the minimum via hole size is 0.2mm. | |
Min.Via diameter | 0.45mm | For Single&Double Layer PCB, the minimum Via diameter is 0.6mm; For Multi Layer PCB, the minimum via diameter is 0.45mm. | |
Via To Trace | ≥5mil | Minimum distance between via(plated holes) and trace is 5mil. | |
Drill Hole Size | 0.2--6.3mm | Min. drill size is 0.2mm, Max. drill size is 6.3mm. | |
Hole Size Tolerance | ±0.08mm | e.g. For the 0.6mm hole, the finished hole size between 0.52mm to 0.68mm is acceptable. | |
Annular Ring | ≥3mil | Annular ring surrounded by traces should be equal to or larger than 3mil | |
Min. Character Width | ≥6mil | Characters width less than 6mil(0.153mm) will be unidentifiable. | |
Min. Character Height | ≥32mil | Characters height less than 32mil will be unidentifiable. | |
Trace to Outline | ≥0.2mm | Ship as individual board(Ro uting): Trace to Outline ≥0.2mm; Ship as panel with V- scoring: Trace to V-cut line ≥0.4mm |
|
Penalization without space | 0mm | ||
Panelization with space | ≥2mm | Make sure the space between boards should be ≥2mm, otherwise it will be hard to process for routing. | |
Min.Edge Rails | 3mm | ||
Copper Hatching with Pads | Hatch | We will apply Copper Hatching if your PCBs designed with Pads. | |
Slot Drawing with Pads | Outline | Please use Outline to design if there are many non-plated (NPTH) holes. | |
Protel/dxp Solder Layer | Solder Layer | Do not mistake the Paste Layer as Solder Layer. | |
Protel/dxp Outline Layer | Keepout Layer/Mechan ical Layer | Only choose one from Keepout Layer or Mechanical Layer as outline. | |
Min. Half Hole Diameter | 0.6mm | Half hole is a special technology, so half hole diameter should be greater than 0.6mm. |